OBD2 and Dash Plug solution for VW Amarok Dashboard Power UP and Odometer Calibration
👋 Hi there!
If this is your first time here, let us tell you who we are in one sentence: we build software and hardware for electronics technicians who repair digital instrument clusters and FORZA 614 is our flagship tool.
The first thing this cluster shows you when it powers up is a glowing Amarok silhouette with a VW badge in the middle. Flip it over, and the aluminium housing has FoMoCo cast right into it. The label tells the rest of the story: N1XT-10849-CAM, built 8 November 2023, made in Thailand, for a pickup assembled in South Africa and sold mostly in Australia and Europe.
That’s the second-generation VW Amarok instrument cluster in a nutshell - a Volkswagen on the outside, Ford on the inside. Below you’ll find what’s on the board, the display part number, how to wake the dash up on your bench, and what FORZA 614 can do with the mileage and engine hours.
VW Amarok 24C64 Dashboard Power Up and Programming with FORZA 614
A Volkswagen built on Ford’s T6
The new Amarok (2023+) is the twin of the current Ford Ranger. Both ride on Ford’s T6 platform and come off the same line at Ford’s Silverton plant in Pretoria. The two pickups share a lot under the skin - powertrains included.
The dashboard is where it gets interesting. VW offers an 8-inch or a 12-inch digital cluster depending on trim, and the 12-inch unit on our bench has more in common with Ford’s F-150 cluster family than with what you’d expect from a Ranger twin. For your workshop, that means one practical thing: treat the Amarok as its own position in the software, and don’t assume a Ranger procedure will carry over.
What’s inside the Amarok dashboard
The whole cluster lives on one main board (VPN1XF-14B115-XAM). There’s no separate graphics module, the body-control side and the graphics side sit next to each other on the same PCB, with a small blower fan at the bottom of the housing to keep the graphics processor cool. Mileage and engine hours stay serial eeprom 24C64, which is exactly the part of the board FORZA 614 talks to.


- Main microcontroller: Spansion S6J334DJTE ARM-based Traveo MCU that runs the cluster logic and CAN communication
- EEPROM: 24C64 - 64 Kbit serial EEPROM next to the MCU, where mileage, engine hours and configuration data are stored.
- Graphics processor: NXP i.MX 8 (marked SIMX8668035FFAB) - renders the gauges, the Amarok splash screen and every animation you see on the display.
- Memory: Micron packages 3DB17, 3DG1D, 3FA15 and 3GA15 - working memory and storage for the graphics side.
- Ethernet PHY: NXP TJA1101A - automotive Ethernet interface next to the green two-pin J7101 connector.
- Cooling: blower fan built into the rear housing - rare to see in a cluster, and a sign of how much processing power sits behind this screen.



LS124M5LZ04 is 12.4" Display used in Amarok Cluster
VW calls it a 12-inch cluster in its brochures. The panel label says otherwise: LS124M5LZ04, a 12.4-inch colour TFT made in Vietnam, mounted in its own metal frame and connected to the main board with a single wide ribbon cable.

Known faults and DTC codes
Here’s the honest answer: we don’t have any yet. The Amarok is still a young vehicle, most of them are under warranty, and no recurring cluster faults have reached us so far. We’d rather say that openly than invent a list.
What does come up already is cluster replacement – accident damage, used units bought from dismantlers, and dealers who’ll only adapt a replacement cluster when it reads zero. That’s where programming comes in. As soon as real fault patterns show up, we’ll add them here.
Waking up the full cluster on your bench
Out of the car, the Amarok cluster won’t do much with just power applied - it needs CAN BUS traffic before it fully boots. Normally that means a separate CAN generator on your bench.
With FORZA 614 you don’t need one. Connect the cluster with the F1 + F2 cables, click Read Value, and FORZA 614 sends the CAN frames the dash is waiting for. The display comes up fully - Amarok splash screen, gauges in km/h, trip computer, warning lights - exactly as it would in the car.
FORZA 614 software programming options for VW Amarok dashboard
Everything works via OBD2 in the vehicle or on the bench through the dash connector - no soldering, no opening the housing:
- Read current mileage and engine hours.
- Reset mileage and engine hours to 0 - many official dealers will only adapt a replacement cluster that reads zero. Resetting a good used unit gives it a second life instead of forcing your customer into a brand-new cluster at dealer prices.
- Set mileage and engine hours to any value - match a replacement cluster to the vehicle’s real mileage.
ℹ️ Full 24C64 read/write diagnostically is not available. You can use direct serial eeprom programmer for that.
VW Amarok Instrument Cluster Pinout
As always, the full VW Amarok dashboard pinout is in the FORZA 614 app – and the app itself is free. Download it, install it on your PC and browse everything we’ve put inside: board photos, connector views and pinouts for a long list of instrument clusters, Amarok included. No subscription needed just to look.
You’ll also find the pinout graphic for this cluster right below.

Amarok jobs from 3,000 km away – why the bench matters
Australia is the biggest market for the new Amarok, and distances there are no joke. The same goes for any workshop serving a whole country. If you can only program a cluster with the vehicle on site, you only get local jobs.
With the pinout and bench wake-up built into FORZA 614, your customer pulls the cluster, posts it to you, and gets it back programmed - from anywhere in the country. No extra CAN generator to buy, no truck in your yard. That works just as well for importers, exporters and used parts sellers who need clusters reset to zero before they go into another vehicle.
No licences, no tokens - one subscription
FORZA 614 runs on one flat subscription - currently €99 per month.
No per-vehicle licences, no token fees, and every new cluster we add (the Amarok included) lands in your menu with the next update. Compare that with some tools that charge €2,000–3,000+ just for a new-Ford software package.
Don’t let anyone tell you there’s only one way to do this. You’re not tied to one ecosystem – you’re free to choose FORZA 614.
You might also like
- Ford F-150 digital cluster (soon)
- 2025+ Ford Bronco Sport digital cluster
- VW Touareg CR digital cluster
- Ford Focus 24C64 cluster programming
FAQ
What EEPROM does the VW Amarok 2023+ cluster use?
The VW Amarok 2023+ digital cluster stores mileage and engine hours in a 24C64 serial EEPROM, next to a Spansion S6J334 microcontroller.
Is the Amarok cluster the same as the Ford Ranger’s?
The two pickups share the T6 platform, but the cluster hardware is closer to Ford’s F-150 cluster family. FORZA 614 has a dedicated Amarok position in the menu.
Do I need a CAN generator to power up the Amarok cluster on the bench?
No. FORZA 614 sends the required CAN frames itself – connect F1 + F2, click Read Value, and the cluster fully wakes up.
Can I reset the Amarok mileage to zero for dealer adaptation?
Yes. FORZA 614 can reset both mileage and engine hours to 0, or set them to any other value.
Can I program it without removing the cluster?
Yes - via OBD2 in the vehicle, or on the bench via the dash connector.